11011 Electric Roto Starter Backplate 12mm Gear E-Start
11011 Electric Roto Start Backplate
Most 1/10s and 1/8s models.
Not suitable for 1/16s.
Not suitable for engine sizes over .19
Change your standard pull start engine to an upgraded electric starter engine for just £9.99 This is just for the electric starter backplate.
If you need the drill, starter rod, battery and charger etc please see our other items or contact us so we can direct you to the right listing.
To check if this will fit your model remove the pull starter and check the measurements
- Across the center of fixing holes
- Across the flats of hex shape in middle
Item Code: 11011
Distance between center of fixed holes across is 27mm (same for all sides)
Hex Gear Size is 12mm Standard (to fit hex shape - measure across the flats) to fit a 12mm one way bearing. Note: one way bearing not included.
Other sizes available please ask.
Please Note; You may have starter shaft/rod or a one way bearing, please check the hex size accross the flats. We only supply 12 or 14mm size gears to fit. Please ask.
Note: one way bearing not included. Listing for backplate only.
Please check your manual for part codes or contact us if you are not sure.